Duplex 2205 / UNS S32205 Fasteners
Duplex And Super Duplex Fasteners
Duplex S32205 Fasteners, ASTM A479 Duplex S32205 Stud Bolt, UNS S32205 Hex Bolt, ASME SA479 Heavy Hex Nut, DIN 1.4462 Allen Bolt, Grade S32205 Plain Washer, UNS S32205 Spring Washer.
What is meant by Duplex Steel S32205 Fasteners?
The Duplex Steel S32205 Fasteners have nickel, chromium, and molybdenum as part of their chemical makeup. The chemical composition is superb as a result. As a result, these Duplex S32205 Fasteners are both ferritic and austenitic. These UNS S32205 Duplex Fasteners function well because they have quality workability.
Properties of Duplex UNS S32205 Fasteners:
- ASTM A479 Duplex UNS S32205 Hex Bolt provide enhanced corrosion resistance.
- These were created with great strength and easy fabrication in mind.
- In salt and brackish water, it exhibits antioxidant properties. These fasteners inhibit stress corrosion cracking (SSC) and localized corrosion in oxidizing and reducing zones.
- Its chemical specification has been updated to provide improved corrosion resistance. Due to precipitates of delicate micro components that can develop on its surface at high temperatures exceeding 300 degrees Celsius, it is not advised to use these fasteners in specific applications.
- The flexibility of these DIN 1.4462 Threaded Rod is another quality. These Duplex S32205 Fasteners are ductile and have a longer service life. These are also precise in terms of dimensions.
- The Duplex UNS S32205 Stud bolts are renowned for having exceptional fatigue resistance. At ambient temperature, the opposite bending stress takes place.
- Its yield strength and fatigue limit are pretty similar. For instance, the fatigue strength is reduced because of the relationship between the fatigue strength and the rate of corrosion.
- Grade S32205 Heavy Hex Bolts offer significant advantages over commonly produced stainless steel alloys in this instance.
- This fastener provides exceptional strength at a nominal temperature, even below zero. The temperature range for the stress-relieving procedure is 525°C to 600°C. This procedure helps to increase resilience in harsh situations.
Previous
Next
About Duplex 2205 / UNS S32205 Fasteners
Specifications of Duplex UNS S32205 Fasteners:
- ASME SA479 Duplex UNS S32205 Hex Nuts length varies from 3mm to 200mm.
- The forms of S32205 Grade Allen bolts are Screws, Nuts, Bolts, and Washers.
- The Standards of Duplex UNS S32205 Fasteners are ASTM, BS, DIN, and all International Standards.
- These fasteners’ exterior coatings comprise phosphate, hot-dip galvanizing, cadmium, PTFE, Teflon Finish, Zinc Coating, and Xylan Coating.
Applications of Duplex UNS S32205 Fasteners:
Duplex UNS S32205 Fasteners are used in many industrial sectors. A few of them include the following:
- Industrial Chemicals
- Power plant industries Oil & Gas industries
- Shipbuilding Sector
- Industries Using Fertilizer
- Petroleum Industries
- Industries Using Sugar
- Concrete Industries
Additionally, non-permanent couplings may be easily and without causing any harm to the joining components made using Duplex UNS S32205 PTFE Coated Bolts. The most robust and most durable grade of clasps is believed to be duplex UNS S32205. Extreme weather and high temperatures typically call for the employment of these fasteners.
Specification Of Duplex 2205 / UNS S32205 Fasteners
| Specifications | ASTM A479, A182 / ASME SA479, SA182 and DIN, ISO ,JIS ,GB, IS, BS, ASTM and all International Standards |
| Size | M3 - M100 | 3/6″ - 4″ | Custom Sizes |
| Fasteners Length | 3 mm - 200 mm | Custom Sizes |
| Nuts Size | M3 - M56 | 3/6" to 2" | Custom Sizes |
| Washers Size | M3 - M56 | 3/6" to 2" | Custom Sizes |
| Dimensions | DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3 |
| Threads Configuration | ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads and UNF, BSW, BSF, METRIC, UNC, or as required |
| Form | Hex, Threading, Square, Round as per Gauge Etc. |
| Head | Hex, Square, Round, Hex flange, Flat, T-head & Triangular etc. |
| Neck type | Hex, Square, Triangular, Oval & Knurled etc. |
| Manufacturing Process | Passivation /plain, Wire Drawing, Cold Heading, Insert tapping, Heat Treatment, Surface Plating, Inspection, Packing. |
| Surface Coating | Black Oxide, Cadmium, Galvanized, Teflon, Xylan, Zinc, Others Upon Request |
| Packing | IN BULK: carton, pallet, Small Boxes or customer request |
| Test Certificate | As per EN 10204 / 3.1 Manufacturer Test Certificate, PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified |
| Certification | Dual Certified As per ASTM & ASME Codes |
| Delivery time | Regular product : 7-15 days, Custom product : 2-4 weeks |
Equivalent Grades Duplex 2205 / UNS S32205 Fasteners
| STANDARD | UNS | WNR. |
| Duplex Steel 2205 | S32205 | 1.4462 |
Chemical Composition Duplex 2205 / UNS S32205 Fasteners
| Common Name | C% | Mn% | Si% | P% | S% | Cr% | Ni% | Mo% | N% |
| S32205 | 0.030 | 2.00 | 1.00 | 0.030 | 0.020 | 22.0-23.0 | 4.5-6.5 | 3.0-3.5 | 0.14-0.20 |
Mechanical Properties Duplex 2205 / UNS S32205 Fasteners
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.9 g/cm3 | 1402 °C (2555 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 40 % |
Dimensions Of Duplex 2205 / UNS S32205 Fasteners
Duplex Steel Bolts Dimensions Chart :
| Nominal Size or Basic Product Diameter | Full-Size Body Diameter, E | Width Across Flats, F | Width Across Corners, G | Head Height, H Basic | Radius of Fillet, R | Nominal Thread Length for Bolt Lengths, LT |
|||||||||
| inch | mm | Max | Min | Basic inch | Max | Min | Max | Min | Basic inch | Max | Min | Max | Min | 6 in. and Shoter | Over 6 in. |
| 1⁄4 | 0.25 | 0.26 | 0.237 | 7⁄16 | 0.438 | 0.425 | 0.505 | 0.484 | 11⁄64 | 0.188 | 0.15 | 0.03 | 0.01 | 0.75 | 1 |
| 5⁄16 | 0.3125 | 0.324 | 0.298 | 1⁄2 | 0.5 | 0.484 | 0.577 | 0.552 | 7⁄32 | 0.235 | 0.195 | 0.03 | 0.01 | 0.875 | 1.125 |
| 3⁄8 | 0.375 | 0.388 | 0.36 | 9⁄16 | 0.562 | 0.544 | 0.65 | 0.62 | 1⁄4 | 0.268 | 0.226 | 0.03 | 0.01 | 1 | 1.25 |
| 7⁄16 | 0.4375 | 0.452 | 0.421 | 5⁄8 | 0.625 | 0.603 | 0.722 | 0.687 | 19⁄64 | 0.316 | 0.272 | 0.03 | 0.01 | 1.125 | 1.375 |
| 1⁄2 | 0.5 | 0.515 | 0.482 | 3⁄4 | 0.75 | 0.725 | 0.866 | 0.826 | 11⁄32 | 0.364 | 0.302 | 0.03 | 0.01 | 1.25 | 1.5 |
| 5⁄8 | 0.625 | 0.642 | 0.605 | 15⁄16 | 0.938 | 0.906 | 1.083 | 1.033 | 27⁄64 | 0.444 | 0.378 | 0.06 | 0.02 | 1.5 | 1.75 |
| 3⁄4 | 0.75 | 0.768 | 0.729 | 11⁄8 | 1.125 | 1.088 | 1.299 | 1.24 | 1⁄2 | 0.524 | 0.455 | 0.06 | 0.02 | 1.75 | 2 |
| 7⁄8 | 0.875 | 0.895 | 0.852 | 1 5⁄16 | 1.312 | 1.269 | 1.516 | 1.447 | 37⁄64 | 0.604 | 0.531 | 0.06 | 0.02 | 2 | 2.25 |
| 1 | 1 | 1.022 | 0.976 | 1 1⁄2 | 1.5 | 1.45 | 1.732 | 1.653 | 43⁄64 | 0.7 | 0.591 | 0.09 | 0.03 | 2.25 | 2.5 |
| 1 1⁄8 | 1.125 | 1.149 | 1.098 | 1 11⁄16 | 1.688 | 1.631 | 1.949 | 1.859 | 3⁄4 | 0.78 | 0.658 | 0.09 | 0.03 | 2.5 | 2.75 |
| 1 1⁄4 | 1.25 | 1.277 | 1.223 | 1 7⁄8 | 1.875 | 1.812 | 2.165 | 2.066 | 27⁄32 | 0.876 | 0.749 | 0.09 | 0.03 | 2.75 | 3 |
| 1 3⁄8 | 1.375 | 1.404 | 1.345 | 2 1⁄16 | 2.062 | 1.994 | 2.382 | 2.273 | 29⁄32 | 0.94 | 0.81 | 0.09 | 0.03 | 3 | 3.25 |
| 1 1⁄2 | 1.5 | 1.531 | 1.47 | 2 1⁄4 | 2.25 | 2.175 | 2.598 | 2.48 | 1 | 1.036 | 0.902 | 0.09 | 0.03 | 3.25 | 3.5 |
| 1 5⁄8 | 1.625 | 1.658 | 1.591 | 2 7⁄16 | 2.438 | 2.356 | 2.815 | 2.616 | 1 3⁄32 | 1.116 | 0.978 | 0.09 | 0.03 | 3.5 | 3.75 |
| 1 3⁄4 | 1.75 | 1.785 | 1.716 | 2 5⁄8 | 2.625 | 2.538 | 3.031 | 2.893 | 1 5⁄32 | 1.196 | 1.054 | 0.12 | 0.04 | 3.75 | 4 |
| 1 7⁄8 | 1.875 | 1.912 | 1.839 | 2 13⁄16 | 2.812 | 2.719 | 3.248 | 3.099 | 1 1⁄4 | 1.276 | 1.13 | 0.12 | 0.04 | 4 | 4.25 |
| 2 | 2 | 2.039 | 1.964 | 3 | 3 | 2.9 | 3.464 | 3.306 | 1 11⁄32 | 1.388 | 1.175 | 0.12 | 0.04 | 4.25 | 4.5 |
| 2 1⁄4 | 2.25 | 2.305 | 2.214 | 3 3⁄8 | 3.375 | 3.262 | 3.897 | 3.719 | 1 1⁄2 | 1.548 | 1.327 | 0.19 | 0.06 | 4.75 | 5 |
| 2 1⁄2 | 2.5 | 2.559 | 2.461 | 3 3⁄4 | 3.75 | 3.625 | 4.33 | 4.133 | 1 21⁄32 | 1.708 | 1.479 | 0.19 | 0.06 | 5.25 | 5.5 |
| 2 3⁄4 | 2.75 | 2.827 | 2.711 | 4 1⁄8 | 4.125 | 3.988 | 4.763 | 4.546 | 1 13⁄16 | 1.869 | 1.632 | 0.19 | 0.06 | 5.75 | 6 |
| 3 | 3 | 3.081 | 2.961 | 4 1⁄2 | 4.5 | 4.35 | 5.196 | 4.959 | 2 | 2.06 | 1.815 | 0.19 | 0.06 | 6.25 | 6.5 |
| 3 1⁄4 | 3.25 | 3.335 | 3.21 | 4 7⁄8 | 4.875 | 4.712 | 5.629 | 5.372 | 2 3⁄16 | 2.251 | 1.936 | 0.19 | 0.06 | 6.75 | 7 |
| 3 1⁄2 | 3.5 | 3.589 | 3.461 | 5 1⁄4 | 5.25 | 5.075 | 6.062 | 5.786 | 2 5⁄16 | 2.38 | 2.057 | 0.19 | 0.06 | 7.25 | 7.5 |
| 3 3⁄4 | 3.75 | 3.858 | 3.726 | 5 5⁄8 | 5.625 | 5.437 | 6.495 | 6.198 | 2 1⁄2 | 2.572 | 2.241 | 0.19 | 0.06 | 7.75 | 8 |
| 4 | 4 | 4.111 | 3.975 | 6 | 6 | 5.8 | 6.928 | 6.612 | 2 11⁄16 | 2.764 | 2.424 | 0.19 | 0.06 | 8.25 | 8.5 |
Duplex Steel Stud Bolts Dimensions Chart :
| Nominal Size Diameter, D inch | Tap End Full Thread Length, BM | Umax = 2P | Minimum Nut End Full Thread Length, Bmin |
||||||
| Nominal | Min. | Max. | UNC & NC-5 Thread | UNF Thread | 8UN Thread | L ≤ 10 | 10 | L > 16 | |
| 1/4 | 0.375 | 0.350 | 0.400 | 0.100 | 0.071 | ... | 0.750 | 1.000 | 1.500 |
| 5/16 | 0.469 | 0.440 | 0.498 | 0.111 | 0.083 | -- | 0.875 | 1.125 | 1.625 |
| 3/8 | 0.563 | 0.532 | 0.594 | 0.125 | 0.083 | -- | 1.000 | 1.250 | 1.750 |
| 7/16 | 0.656 | 0.620 | 0.692 | 0.143 | 0.100 | -- | 1.125 | 1.375 | 1.875 |
| 1/2 | 0.750 | 0.708 | 0.792 | 0.154 | 0.100 | -- | 1.250 | 1.500 | 2.000 |
| 9/16 | 0.844 | 0.802 | 0.896 | 0.167 | 0.111 | -- | 1.375 | 1.625 | 2.125 |
| 5/8 | 0.938 | 0.892 | 0.983 | 0.182 | 0.111 | -- | 1.500 | 1.750 | 2.250 |
| 3/4 | 1.1.25 | 1.075 | 1.175 | 0.200 | 0.125 | -- | 1.750 | 2.000 | 2.500 |
| 7/8 | 1.313 | 1.258 | 1.368 | 0.222 | 0.143 | -- | 2.000 | 2.250 | 2.750 |
| 1 | 1.500 | 1.438 | 1.562 | 0.250 | 0.167 | -- | 2.250 | 2.500 | 3.000 |
| 1 1/8 | 1.688 | 1.625 | 1.750 | 0.286 | 0.167 | 0.250 | 2.500 | 2.750 | 3.250 |
| 1 1/4 | 1.875 | 1.813 | 1.938 | 0.286 | 0.167 | 0.250 | 2.750 | 3.000 | 3.500 |
| 1 3/8 | 2.063 | 2.000 | 2.125 | 0.333 | 0.167 | 0.250 | 3.000 | 3.250 | 3.750 |
| 1 1/2 | 2.250 | 2.188 | 2.313 | 0.333 | 0.167 | 0.250 | 3.250 | 3.500 | 4.000 |
| 1 5/8 | 2.438 | 2.375 | 2.500 | -- | -- | 0.250 | 3.500 | 3.750 | 4.250 |
| 1 3/4 | 2.625 | 2.563 | 2.688 | 0.400 | -- | 0.250 | 3.750 | 4.000 | 4.500 |
| 1 7/8 | 2.813 | 2.750 | 2.875 | -- | -- | 0.250 | 4.000 | 4.250 | 4.750 |
| 2 | 3.000 | 2.925 | 3.075 | 0.444 | -- | 0.250 | 4.250 | 4.500 | 5.000 |
| 2 1/4 | 3.375 | 3.300 | 3.450 | 0.444 | -- | 0.250 | 4.750 | 5.000 | 5.500 |
| 2 1/2 | 3.750 | 3.675 | 3.825 | 0.500 | -- | 0.250 | 5.250 | 5.500 | 6.000 |
| 2 3/4 | 4.125 | 4.050 | 4.200 | 0.500 | -- | 0.250 | 5.750 | 6.000 | 6.500 |
| 3 | 4.500 | 4.425 | 4.575 | 0.500 | -- | 0.250 | -- | 6.500 | 7.000 |
| 3 1/4 | 4.875 | 4.775 | 4.975 | 0.500 | -- | 0.250 | -- | 7.000 | 7.500 |
| 3 1/2 | 5.250 | 5.150 | 5.350 | 0.500 | -- | 0.250 | -- | 7.500 | 8.000 |
| 3 3/4 | 5.625 | 5.525 | 5.725 | 0.500 | -- | 0.250 | -- | 8.000 | 8.500 |
| 4 | 6.000 | 5.900 | 6.100 | 0.500 | -- | 0.250 | -- | 8.500 | 9.000 |
Duplex Steel Nuts Dimensions :
| Nominal Size inch | Basic Major Diameter of Thread | Width Across Flats, F | Width Across Corners, G | Thickness Heavy Hex Nuts, H | Thickness Heavy Hex Jam Nuts, H1 | Maximum Runout of Bearing Surface to Thread Axis, FIM |
|||||||||
| Heavy HEX NUTS | Heavy Hex Jam Nuts |
||||||||||||||
| Specified Proof load | |||||||||||||||
| Basic inch | Min. | Max | Min. | Max | Basic inch | Min. | Max | Basic inch | Min. | Max | Up to 150,000 psi | 150,000 psi and Greater | All Strength Levels |
||
| 1/4 | 0.2500 | 1/2 | 0.488 | 0.500 | 0.556 | 0.577 | 15/64 | 0.218 | 0.250 | 11/64 | 0.156 | 0.188 | 0.017 | 0.011 | 0.017 |
| 5/16 | 0.3125 | 9/16 | 0.546 | 0.562 | 0.622 | 0.650 | 19/64 | 0.280 | 0.314 | 13/64 | 0.186 | 0.220 | 0.020 | 0.012 | 0.020 |
| 3/8 | 0.3750 | 11/16 | 0.669 | 0.688 | 0.763 | 0.794 | 23/64 | 0.341 | 0.377 | 15/64 | 0.216 | 0.252 | 0.021 | 0.014 | 0.021 |
| 7/16 | 0.4375 | 3/4 | 0.728 | 0.750 | 0.830 | 0.866 | 27/64 | 0.403 | 0.441 | 17/64 | 0.247 | 0.285 | 0.022 | 0.015 | 0.022 |
| 1/2 | 0.5000 | 7/8 | 0.850 | 0.875 | 0.969 | 1.010 | 31/64 | 0.464 | 0.504 | 19/64 | 0.277 | 0.317 | 0.023 | 0.016 | 0.023 |
| 9/16 | 0.5625 | 15/16 | 0.909 | 0.938 | 1.037 | 1.083 | 35/64 | 0.526 | 0.568 | 21/64 | 0.307 | 0.349 | 0.024 | 0.017 | 0.024 |
| 5/8 | 0.6250 | 1 1/16 | 1.031 | 1.062 | 1.175 | 1.227 | 39/64 | 0.587 | 0.631 | 23/64 | 0.337 | 0.381 | 0.025 | 0.018 | 0.025 |
| 3/4 | 0.7500 | 1 1/4 | 1.212 | 1.250 | 1.382 | 1.443 | 47/64 | 0.710 | 0.758 | 27/64 | 0.398 | 0.446 | 0.027 | 0.020 | 0.027 |
| 7/8 | 0.8750 | 1 7/16 | 1.394 | 1.438 | 1.589 | 1.660 | 55/64 | 0.833 | 0.885 | 31/64 | 0.458 | 0.510 | 0.029 | 0.022 | 0.029 |
| 1 | 1.0000 | 1 5/8 | 1.575 | 1.625 | 1.796 | 1.876 | 63/64 | 0.956 | 1.012 | 35/64 | 0.519 | 0.575 | 0.031 | 0.024 | 0.031 |
| 1 1/8 | 1.1250 | 1 13/16 | 1.756 | 1.812 | 2.002 | 2.093 | 1 7/64 | 1.079 | 1.139 | 39/64 | 0.579 | 0.639 | 0.033 | 0.027 | 0.033 |
| 1 1/4 | 1.2500 | 2 | 1.938 | 2.000 | 2.209 | 2.309 | 1 7/32 | 1.187 | 1.251 | 23/32 | 0.687 | 0.751 | 0.035 | 0.030 | 0.035 |
| 1 3/8 | 1.3750 | 2 3/16 | 2.119 | 2.188 | 2.416 | 2.526 | 1 11/32 | 1.310 | 1.378 | 25/32 | 0.747 | 0.815 | 0.038 | 0.033 | 0.038 |
| 1 1/2 | 1.5000 | 2 3/8 | 2.300 | 2.375 | 2.622 | 2.742 | 1 15/32 | 1.433 | 1.505 | 27/32 | 0.808 | 0.880 | 0.041 | 0.036 | 0.041 |
| 1 5/8 | 1.6250 | 2 9/16 | 2.481 | 2.562 | 2.828 | 2.959 | 1 19/32 | 1.556 | 1.632 | 29/32 | 0.868 | 0.944 | 0.044 | 0.038 | 0.044 |
| 1 3/4 | 1.7500 | 2 3/4 | 2.662 | 2.750 | 3.035 | 3.175 | 1 23/32 | 1.679 | 1.759 | 31/32 | 0.929 | 1.009 | 0.048 | 0.041 | 0.048 |
| 1 7/8 | 1.8750 | 2 15/16 | 2.844 | 2.938 | 3.242 | 3.392 | 1 27/32 | 1.802 | 1.886 | 1 1/32 | 0.989 | 1.073 | 0.051 | 0.044 | 0.051 |
| 2 | 2.0000 | 3 1/8 | 3.025 | 3.125 | 3.449 | 3.608 | 1 31/32 | 1.925 | 2.013 | 1 3/32 | 1.050 | 1.138 | 0.055 | 0.047 | 0.055 |
| 2 1/4 | 2.2500 | 3 1/2 | 3.388 | 3.500 | 3.862 | 4.041 | 2 13/64 | 2.155 | 2.251 | 1 13/64 | 1.155 | 1.251 | 0.061 | 0.052 | 0.061 |
| 2 1/2 | 2.5000 | 3 7/8 | 3.750 | 3.875 | 4.275 | 4.474 | 2 29/64 | 2.401 | 2.505 | 1 29/64 | 1.401 | 1.505 | 0.068 | 0.058 | 0.068 |
| 2 3/4 | 2.7500 | 4 1/4 | 4.112 | 4.250 | 4.688 | 4.907 | 2 45/64 | 2.647 | 2.759 | 1 37/64 | 1.522 | 1.634 | 0.074 | 0.064 | 0.074 |
| 3 | 3.0000 | 4 5/8 | 4.475 | 4.625 | 5.102 | 5.340 | 2 61/64 | 2.893 | 3.013 | 1 45/64 | 1.643 | 1.763 | 0.081 | 0.070 | 0.081 |
| 3 1/4 | 3.2500 | 5 | 4.838 | 5.000 | 5.515 | 5.774 | 3 3/16 | 3.124 | 3.252 | 1 13/16 | 1.748 | 1.876 | 0.087 | 0.075 | 0.087 |
| 3 1/2 | 3.5000 | 5 3/8 | 5.200 | 5.375 | 5.928 | 6.207 | 3 7/16 | 3.370 | 3.506 | 1 15/16 | 1.870 | 2.006 | 0.094 | 0.081 | 0.094 |
| 3 3/4 | 3.7500 | 5 3/4 | 5.562 | 5.750 | 6.341 | 6.640 | 3 11/16 | 3.616 | 3.760 | 2 1/16 | 1.990 | 2.134 | 0.100 | 0.087 | 0.100 |
| 4 | 4.0000 | 6 1/8 | 5.925 | 6.125 | 6.755 | 7.073 | 3 15/16 | 3.862 | 4.014 | 2 3/16 | 2.112 | 2.264 | 0.107 | 0.093 | 0.107 |
Duplex Steel Washer Dimensions Chart :
| Nominal Size | T | Clipped Width E, Min. | ||||||||||||
| I.D. | O.D. | Standard | Extra Thick | |||||||||||
| [Note (1)] | Max. | Min. | Max. | Min. | Max. | Min. | Max. | Min. | [Note (2)] | |||||
| 12 | 14.4 | 14 | 27 | 25.7 | 4.6 | 3.1 | 10 | 8 | 10.5 | |||||
| 16 | 18.4 | 18 | 34 | 32.4 | 4.6 | 3.1 | 10 | 8 | 14 | |||||
| 20 | 22.5 | 22 | 42 | 40.4 | 4.6 | 3.1 | 10 | 8 | 17.5 | |||||
| 22 | 24.5 | 24 | 44 | 42.4 | 4.6 | 3.4 | 10 | 8 | 19.2 | |||||
| 24 | 26.5 | 26 | 50 | 48.4 | 4.6 | 3.4 | 10 | 8 | 21 | |||||
| 27 | 30.5 | 30 | 56 | S4.1 | 4.6 | 3.4 | 10 | 8 | 23.6 | |||||
| 30 | 33.6 | 33 | 60 | 58.1 | 4.6 | 3.4 | 10 | 8 | 26.2 | |||||
| 36 | 39.6 | 39 | 72 | 70.1 | 4.6 | 3.4 | 10 | 8 | 31.S | |||||
| 42 | 45.6 | 45 | 84 | 81.8 | 7.2 | 4.6 | 10 | 8 | 36.7 | |||||
| 48 | 52.7 | 52 | 95 | 92.8 | 7.2 | 4.6 | 10 | 8 | 42 | |||||
| 56 | 62.7 | 62 | 107 | 104.8 | 8.7 | 6.1 | 10 | 8 | 49 | |||||
| 64 | 70.7 | 70 | 118 | 115.8 | 8.7 | 6.1 | 10 | 8 | 56 | |||||
| 72 | 78.7 | 78 | 130 | 127.5 | 8.7 | 6.1 | 10 | 8 | 63 | |||||
| 80 | 86.9 | 86 | 142 | 139.5 | 8.7 | 6.1 | 10 | 8 | 70 | |||||
| 90 | 96.9 | 96 | 159 | 156.5 | 8.7 | 6.1 | 10 | 8 | 78.7 | |||||
| 100 | 107.9 | 107 | 176 | 173.5 | 8.7 | 6.1 | 10 | 8 | 87.5 | |||||
Different Types Of Duplex 2205 / UNS S32205 Fasteners
Different Types Of Bolts
- Duplex S32205 Bolts
- DIN 1.4462 Carriage Bolts
- ASTM A479 Duplex S32205 Hex Bolts
- Duplex S32205 Forged Hook Bolts
- ASTM A479 UNS S32205 Eye Bolts
- Duplex S32205 Allen Bolts
- Duplex S32205 Flange Head Bolts
- S32205 Duplex Hex Head Bolts
- S32205 Duplex Torx Bolts
- UNS S32205 12-Point U Bolts
- Duplex S32205 Countersunk Bolts
- A2-70 Duplex Bolts
Different Types Of Studs Bolts
- Duplex S32205 Tap End Stud bolt
- UNS S32205 Continuous Threaded Stud bolt
- ASTM A479 Duplex S32205 Double End Stud bolt
- ASME SA182 Duplex S32205 Flange Stud bolt
- Werkstoff Nr. 1.4462 Fully Threaded Rod
- ASTM A182 UNS S32205 Stud Bolts
- A2-70 Duplex S32205 Stud Bolts
- Grade S32205 Half Threaded Rod
- S32205 Duplex Stud Bolts
- Duplex S32205 Hexagonal Stud bolts
- DIN 1.4462 Duplex S32205 Threaded Stud bolts
Different Types Of Nuts
- Duplex S32205 Metric Nuts
- S32205 Duplex Sleeve Nuts
- DIN 1.4462 Captive Nuts
- ASTM A182 Duplex S32205 Hex Nuts
- UNS S32205 Rivet Nuts
- ASME SA479 Acorn Nuts
- ASME SA182 Duplex S32205 T Nuts
- Duplex S32205 Dome Nuts
- ASTM A182 Grade S32205 Lug Nut
- ASTM A479 UNS S32205 Castle Nuts
- Duplex S32205 12-Point Nuts
- S32205 Duplex Lock Nuts
Different Types Of Washer
- UNS S32205 Sealing Washer
- ASTM A182 Duplex S32205 Plain Washer
- DIN 1.4462 Split Washer
- UNS S32205 Square Washer
- Duplex S32205 Spring Washer
- Duplex S32205 Star Washer
- Duplex S32205 Spring Washer
- ASME SA479 Duplex S32205 Tab Washer
- ASTM A182 Grade S32205 Flat Washer
- S32205 Duplex Lock Washer
Different Types Of Screw
- Duplex S32205 Self Drilling Screws
- Duplex S32205 Self Tapping Screws
- ASTM A182 Grade S32205 Wood Screws
- DIN 1.4462 Grub Screws
- Grade S32205 Polished Screws
- ASME SA182 Duplex S32205 Countersunk Screws
- ASTM A479 Duplex S32205 Torx Screws
- UNS S32205 Roofing Screws
Application of Duplex 2205 / UNS S32205 Fasteners
Previous
Next
Testing of Duplex 2205 / UNS S32205 Fasteners
Previous
Next
Packing of Duplex 2205 / UNS S32205 Fasteners
Previous
Next
Destination Of Duplex 2205 / UNS S32205 Fasteners
Duplex S32205 Allen Bolt Exporter in Pune, Duplex S32205 Lag Bolt Manufacturer in Hyderabad, ASTM A182 Duplex S32205 Hex Bolt Manufacturer in Bengaluru, Duplex S32205 Square Bolt Stockist in Dammam, Duplex S32205 Stud Bolt Stockist in Pimpri-Chinchwad, Din 1.4462 Head Hex Nut Stockist in Bangalore, ASME SA182 Duplex S32205 Industrial Fasteners Exporter in Nashik, UNS S32205 Hot Forged Bolts Supplier in Vadodara, ASTM A479 Duplex S32205 high tensile Bolts Manufacturer in Bharuch, Din 1.4462 Hex nut Exporter in Hyderabad, Din 1.4462 Carriage Bolt Exporter in Dubai, Duplex S32205 Steel Bolt Supplier in Coimbatore, ASME SA479 Duplex S32205 Spring washer Stockist in Ahmedabad, ASTM A182 Duplex S32205 Heavy Hex Bolt Supplier in Chennai, Duplex S32205 U Bolt Supplier in Abu Dhabi, UNS S32205 Plain Washer Manufacturer in Mumbai.
UNS S32205 Hot Forged Bolts Supplier in Vietnam, ASME SA182 Duplex S32205 Industrial Fasteners Exporter in Oman, Duplex S32205 Stud Bolt Stockist in UK, Duplex S32205 Lag Bolt Manufacturer in Indonesia, Din 1.4462 Head Hex Nut Stockist in South Africa, Din 1.4462 Hex nut Exporter in Kuwait, Duplex S32205 U Bolt Supplier in UK, Duplex S32205 Allen Bolt Exporter in Qatar, UNS S32205 Plain Washer Manufacturer in Singapore, Duplex S32205 Square Bolt Stockist in Italy, ASTM A182 Duplex S32205 Heavy Hex Bolt Supplier in UAE, ASTM A479 Duplex S32205 high tensile Bolts Manufacturer in Australia, ASTM A182 Duplex S32205 Hex Bolt Manufacturer in USA, Duplex S32205 Steel Bolt Supplier in Saudi Arabia, ASME SA479 Duplex S32205 Spring washer Stockist in Malaysia, Din 1.4462 Carriage Bolt Exporter in Canada.
Get UNS S32205 Head Hex Nut Chemical Composition, A wide range of Duplex S32205 Fasteners Size Chart, Duplex S32205 Grade Fastener Price Per Kg, Din 1.4462 Hex Bolt Weight Calculator, Buy Duplex S32205 Stud bolts, Best Quality of S32205 Grade Bolts, ASTM A182 Duplex S32205 Weight Chart, UNS S32205 Duplex Fasteners Price List In India, Austenitic S32205 Duplex Nuts, Duplex S32205 Heavy Hex Bolt Dimension PDF, Duplex S32205 Anchor Bolt Price List, ASME SA479 Duplex S32205 Square Bolt Catalogue, Get Quote Now of S32205 Fasteners At Factory Price.